Garage Consumer Unit IP65 4 Way Fuse Box Fitted with RCD 63amp 30ma + 1X6amp, 2X20amp & 1X32amp mcbs

£9.9
FREE Shipping

Garage Consumer Unit IP65 4 Way Fuse Box Fitted with RCD 63amp 30ma + 1X6amp, 2X20amp & 1X32amp mcbs

Garage Consumer Unit IP65 4 Way Fuse Box Fitted with RCD 63amp 30ma + 1X6amp, 2X20amp & 1X32amp mcbs

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

High quality materials: Hager consumer units are made from high-quality materials, such as metal enclosures and high-impact thermoplastics, to provide long-lasting performance and durability. This simple copper bar features teeth that protrude up and run from the live input of the RCD to each MCB. When screwed tight this gives live feed to all the MCBs. If this isn’t done then it can lead to all manner of issues when reconnecting and testing the circuits, so it’s best for both your electrician and also you to know if there are issues before any work is started. Following the latest amendment to the 18th Edition Wiring Regulations, Main Switch Consumer units are now commonly populated with Type 2 Surge Protection Devices as standard. Of these boards, the FuseBox F2014MX is proving to be a very popular fuse board. It features 14 usable ways which can be populated with Type A RCBOs or the latest Arc Fault Detection devices (AFDD).

Once the safety side of the board is in place, the next items to be installed are the MCB’s, one for each required circuit. The first type is the single load consumer unit. This is where the incoming mains power is first taken through a double pole isolation switch, which then in turn feeds a live bus bar that supplies each MCB on the board. The RCD is then clipped onto the DIN bar. The top clip is first clipped over the top of the bar and then bottom either clips over using a spring clip, a screw or simply just clips over. To find a local, reputable, tradesperson in your area and get a personalised fuse box and consumer unit replacement cost use our free search feature. FAQs Do I need an electrical inspection? Before any work is done, firstly it is ensured that power to the entire property is isolated so that the consumer unit can be safely worked on.

A 'Dual RCD Consumer Unit' is supplied with the main switch and two RCDs and offers a cheaper solution. Our image shows a typical installation with the two banks of MCBs protected from earth leakage by the RCDs. Unfortunately, it can take a couple of seconds for the fuse to melt and break the electrical circuit, this may seem insignificant, but it greatly increases the risk of fires and electrical damage. Consumer unit The image below is of what’s known as a split load board. This is where it features a main switch for the entire board plus at least 1 RCD labeled as “E”.

When it comes to a modern split consumer unit, the use of RCDs is necessary for 2 reasons to meet the wiring regulations.Condition of old unit: When replacing a fuse box or consumer unit you may be charged a fee to remove the old unit. This charge may increase if the old unit is in poor condition way circuit using RCBO’s and RCD’s – Image courtesy of the BS7671 18th Edition Wiring Regulations What are RCD’s? Essentially, if an EICR (Electrical Installation Condition Report) is carried out on such a setup and it is found that everything is working as it should be then all should be well, as long as there are no outside or zoned circuits that require an RCD. High Integrity consumer units are becoming increasingly popular with electricians - becausethey make circuit design easy - and homeowners - because they offer excellent protection without breaking the bank. They are particularly good in projects requiring 12 or more circuits.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop