Fixman 566783 Chain Plate Electro Galvanised Staple 50 mm x 50 mm

FREE Shipping

Fixman 566783 Chain Plate Electro Galvanised Staple 50 mm x 50 mm

Fixman 566783 Chain Plate Electro Galvanised Staple 50 mm x 50 mm

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


As a sailing yacht is sailing, different forces are applied to the whole system of standing rigging all the time.

I am currently checking different methods which is the best way: Resin without GRP-mesh, resin with GRP-mesh, classic filler. Shrouds deviate those forces into the chain plates which for themselves should be fitted tightly to the hull where the forces will be finally absorbed. when the assembly is dis-assembled, I would consider non destructive testing of the chainplate itself. Mine is 40 years old so it was no surprise finding that I should take a look onto the chain plates of the yacht too.Like I said in my earlier reply, there is no partial repair, this partial bulkhead requires total replacement, I would not doubt that the one on the other side is probably as bad. As a yachtmaster you should pay close attention to seal your chain plates both on the roof of your cabin as well as in the duct itself and finally down inside in the cabin itself. Eventually the whole system will begin to shift and move, will work fractions of millimeters up and down. I also found out that the wood extends to the level were you put the cushions, and not bellow, as you can see in the pictures. Finally I´ve found most of the Balsa core intact and dry but eventually three holes have been severely attacked by the moisture.

But if that is the case then it might be possible to pull out the rotten piece forward, into the cupboard, having cut through the glass tabbing. The very two chain plates which have caused the core in the beams to partially disintegrate have done much more damage to the roof. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.And, well, yes, with a sigh … some more items made it onto my to-do list after some 3 hours of work. Normally I would say, most handyman carpenters could do most bulkhead replacements, but this one is very convoluted and will come apart and go back together like a puzzle. years of being out on salty waters, exposed to constant strain and forces by the shrouds, waves and ups and downs of temperatures do leave their marks on every material.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop